The New Cook
Creative Commons License photo: Joshua Davis (jdavis.info)

I noticed something quite odd lately – when the microwave oven in my house was being used, I would lose all connectivity on my wireless internet connection. That lead to the internet dropping out in the whole house – internet radio, game consoles, laptops, etc.

It turns out that the issue is that microwave ovens and wireless internet operate on the same frequencies. My microwave uses a frequency of 2450MHz (check the back of your microwave as yours may be different) and my wireless (802.11g) operated on channel 11 (around 2462MHz). As you can imagine, the microwave oven outputs with a lot more power than the wireless router so totally overwhelms your ability to use wi-fi.

The solution is to change the frequency that your wireless internet operates on.

Firstly, check the back of your microwave oven and find out what frequency it operates on.

Now you’ll want to change the frequency that your wireless internet operates on. As a rule of thumb, you’ll probably want it to be at least 20MHz different from your microwave. As my wireless was operating at 2462MHz, it was well within the frequency range which was susceptible to interference from the microwave.

Modulazione di frequenza
Creative Commons License photo: Un ragazzo chiamato Bi

Here are the wi-fi channels and corresponding frequencies:

Channel Frequency (MHz)
1 2412
2 2417
3 2422
4 2427
5 2432
6 2437
7 2442
8 2447
9 2452
10 2457
11 2462
12 2467
13 2472
14 2484

It’s important to note that these are center frequencies. In other words, your wireless internet will use a range of frequencies around that frequency (e.g. channel 11 is centred on 2462MHz but actually uses all frequencies between 2451MHz and 2473MHz). Hence you need to make sure there is a sufficient gap between the frequency of your wireless internet and the frequency of the microwave. Consult this graph on Wikipedia for more information.

Check local laws too about what frequencies and power levels you are allowed to use. You can use channels 1-13 in most of the world with the exception of channels 12 and 13 in North America.

Your Comments 16 so far

We'd love to hear your thoughts and any questions you may have. So far, we've received 16 comments from readers. You can add your own comment here.

  • Hi Ken, thanks so much for the clear explanation!

    My router is located on a shelve about 40cm above my microwave. I changed my router frequency as you said, but weirdly, now running the microwave won’t affect the wifi at all if my laptop is in FRONT of the microwave & router. If my laptop is in my room which is behind the microwave & router, the wifi speed will drop drastically.

    My microwave runs at 2450Mhz and my router is set to run at 2412 Mhz.

    Do you have any further advice for this? Thanks! 🙂

    • Hi Ishaq,
      Thanks for your comment. The exact instructions will depend on your router (e.g. the manufacturer and the model). In general, you’ll need to log in to your router’s admin interface (try visiting http://192.168.0.1/ or http://192.168.1.1/ from your browser). After logging in, you should see an option for the wi-fi channel (normally listed under the wi-fi network settings).
      Hope this helps,
      Ken

Load more comments (12)

Leave a Reply